Press the fire button to make confirmation and go to next step. Press up button or down button simultaneously to choose the function. Press up and down buttons simultaneously for 1.5 seconds, enter the function menu Interface. Press fire button and down button at the same time for 1.5 Seconds, the screen will flip. Under the locked Mode,”UP” button, “DOWN” button and “FIRE” butons are not available, Combination Key for operation is okĬ. Press the up and fire buttons simultaneously will unlock the device. Press fire button and up buttons at the same time for 1.5 Seconds, it will be locked. Press up and down buttons at the same time for 1.5 Seconds, the device will enter Function Menu Interface. You can switch between voltage and wattage modes in the function menu. The device can automatically recommend an optimum voltage for your atomizer’s resistanceĭ.
Voltage regulation: 0.5~7.5V adjustment step: 0.1 V. Resistance range under Super Mode is 0.1-0.30Ĭ. The device can match the right power according to the value of resistance automatically.ī. Check the display as shown below:ġ30-157W is Super Mode, each step is 1watt. The adjustable wattage is SW to 80W.ĥ- 129W is normal mode, each step is 1 watt. Then you will see the letter “W” is flashing.
Quickly press fire button 4 times can get into wattage adjustment interface. When temperature was set to 200F, keep on pressing the down button, temperature will turn to 315℃ c, keep on pressing the down button, temperature will °.
Press fire button three times quickly to change between the four interfaces:Ĭonstant power temperature control SS/NI/Ti.Ĭonstant Voltagetemperature control 55/NI/Ti. Press the fire button 5 times continuously. Support Balance Charge with difference brand battery 5.
0 kommentar(er)
